Anti-spring rain need paint face beauty
The spring rain is heavy, and over time it will cause damage to the paint on the car. Therefore, in the spring where there is a lot of rain, it is better to give the car a varnish when performing season maintenance.
There are two main types of car wax on the market: solid wax and liquid wax. Normally solid waxes are grinding waxes, and liquid waxes are also called brighteners or bright glazes. They can be applied evenly to the paint. The advantage of this beauty method is that it is easy to operate. The average owner can DIY himself and waxing at a car beauty shop can also be done.
Sealing glaze is to improve the anti-abrasive ability of the paint surface by covering the automotive paint surface with a high molecular polymer to achieve a long lasting effect. However, the durability is general. After 4-6 months, the polymer layer begins to disintegrate. At this time, it needs to be done again. The owner cannot operate on his own and must be provided by a professional shop for construction services.
Timely dust removal
After entering the spring, it is very important to do a clean and dusting of the important parts of the car. If the automobile parts are dirty, the filtration effect will be deteriorated. Excessive impurities will enter the cylinder of the oil circuit, which will increase the wear of the parts and increase the possibility of failure. Therefore, it is necessary to carry out cleaning and maintenance on such “dirty” accessories in time for the season. Owners can usually go to 4S shops or car beauty free of dust for air filters and air conditioner filters.
Clean the air in the car
Dust and food debris in the interior of the car are likely to breed bacteria and aphids in the spring. At the same time, spring is the period when respiratory diseases occur frequently. The space inside the vehicle is small, and it is easy for the passengers to infect each other. Therefore, killing harmful bacteria in the vehicle is a very important task. In general, steam sterilization and photocatalyst are two ways.
Steam sterilization is to align the steam outlet of the steam engine with the ceiling, the seat, the ground velvet, the air conditioning outlet, the instrument panel, and the reserve cabin, and use the steam emitted by the steam engine to kill harmful bacteria in the vehicle.
Photocatalyst is to spray photocatalyst on the ceiling, non-contact operation table, and around the door to decompose tiny substances such as bacteria, aphids and odors into carbon dioxide and water, so as to achieve the purpose of sterilization and deodorization.
Two filters timely dust removal.After entering the spring, it is very important to do a clean and dusting of the important parts of the car. If the automobile parts are dirty, the filtration effect will be deteriorated. Excessive impurities will enter the cylinder of the oil circuit, which will increase the wear of the parts and increase the possibility of failure. If the parts are severely blocked, the vehicles will not work properly.
The main ones are air filters and air conditioner filters. When the car is in use and the ambient air quality is generally good, it is sufficient to periodically replace the air filter according to the maintenance cycle. However, when the ambient air quality is poor, the air cleaner should be cleaned. If the air cleaner is dirty, the amount of air entering the cylinder will be reduced, causing the vehicle's power performance to degrade and the speed to be reduced. The air-conditioning filter should be cleaned or replaced regularly during use, otherwise the clogged filter will prevent and reduce the air from entering the evaporation box. Although the air-conditioning is very large, it still does not feel cool, and some vehicles are accompanied by Odor.